
VST / VSC

VST and VSC strobe controllers drive DCM strobe lights within safe operating limits, so that sharp, still images of fast-moving objects can be captured.
A strobe controller is needed to run strobe lights, which do not work in continuous mode. It safeguards operating conditions such as maximum power, maximum on-time and recovery time, lets you adjust the amount of light reaching the object, and makes it possible to capture sharp, still images of fast-moving objects even when the camera uses a longer exposure time. Except in line-scan applications, where continuous lighting is essential, DCM recommends strobe lighting for its lower consumption, longer lifespan and higher light intensity.
The VST11IB, with one output, and the VST33IB, with three, are compact DIN-rail controllers delivering 6 A per output; they handle up to 2500 triggers per second and pulse widths up to 10 ms in 4 µs steps, and are programmed over RS-232. Because the VST33IB sets the pulse width of each output separately, it suits systems that combine dark-field, dome and axial lighting. The VSC3100B is a three-output RGB controller designed for mixed lighting packages: it regulates the current on every shot in 255 levels and offers 16 memory banks, an opto-isolated trigger input and a trigger output for the camera.
Key features
- VST11IB: 1 input / 1 output; VST33IB: 3 inputs / 3 outputs; 6 A per output
- VST series: up to 2500 triggers per second, pulse width 0–10 ms in 4 µs steps, adjustable initial delay
- VST series: programming over RS-232 with settings kept in non-volatile memory; mounting on 35 mm DIN rail
- VSC3100B: 3 outputs of 6 A each, 18 A when combined into one channel; 255 current levels per output
- VSC3100B: pulse width 24 µs–2 ms in 1 µs steps, delay 30 µs–13.1 ms, up to 1000 pulses per second at full power
- VSC3100B: 16 memory banks, camera trigger output with auto-trigger, thermal protection, updatable firmware; up to 8 devices and 24 outputs on one VCP100 cable
Applications
Technical details
- Current per output
- 6 A
- Outputs
- 1 (VST11IB) / 3 (VST33IB, VSC3100B)
- Trigger rate
- ≤ 2500/s (VST) / ≤ 1000/s (VSC)
- Pulse width
- 0 … 10 ms (VST) / 24 µs … 2 ms (VSC)
- Supply voltage
- 24 VDC ±3 %
- Programming interface
- RS-232 (VST) / USB, VCP100 (VSC)
Product information is compiled from the manufacturers' published documents and is for guidance only. Contact us for model selection, current specifications and pricing.
Let us assess your application together
We test your sample in our laboratory and report on resolution, optics and lighting selection.
