
LTCLHP

LTCLHP telecentric illuminators produce collimated back light for telecentric lenses, giving higher edge contrast and measurement accuracy than diffused backlights.
LTCLHP high-performance telecentric illuminators are designed to back-light objects imaged by telecentric lenses. All the light they emit is collected by the lens and transferred to the camera detector, which gives a very high signal-to-noise ratio. Collimated rays are reflected much less by the sides of the object than diffused light, which removes the border effects that make objects appear smaller, and the collimated geometry increases the depth of field and telecentricity of the lens beyond its nominal specifications.
The series is recommended for high-accuracy measurement of round or cylindrical parts, where diffuse back lighting performs poorly because of reflections from the edges of the object. Very high current stability gives flicker-free illumination even at low currents, a leadscrew multi-turn trimmer at the back tunes the intensity precisely, and the LED source is easy to replace and align. Beam diameters range from 16 mm to 380 mm; the maker recommends green light for high-precision measurement, and the LTSCHP1W-GZ green source reduces edge diffraction effects.
Key features
- Collimated light matched to telecentric lenses; beam diameters from 16 mm to 380 mm
- Red (625 nm), green (525 nm), blue (460 nm) and white (6000 K) LEDs
- 12–24 V supply, maximum power consumption 2.5 W
- Flicker-free light; leadscrew multi-turn trimmer for precise intensity tuning
- Electronics can be bypassed for pulsed operation up to 2000 mA (pulse width ≤ 10 ms, duty cycle ≤ 10 %)
- Homogeneity test report with measured values
Applications
Technical details
- Beam diameter
- 16–380 mm
- Working distance range
- 35–1000 mm
- Colours (peak wavelength)
- 625 / 525 / 460 nm, 6000 K
- Supply voltage
- 12–24 VDC
- Max power consumption
- 2.5 W
- Max pulse current
- 2000 mA
Product information is compiled from the manufacturers' published documents and is for guidance only. Contact us for model selection, current specifications and pricing.
Other series in this group

LT3BC
LT3BC high-power LED backlights with a built-in driver run in continuous, boosted and strobe modes and connect through a standard 5-pin M12 connector.

LTDM
LTDM high-power strobed LED domes give non-directional diffused light that removes glare and shadows on the curved and shiny surfaces of fast-moving objects.

LTPRHP3W
LTPRHP3W LED pattern projectors project sharp lines, grids and other patterns through any C-mount lens, for 3D reconstruction, profilometry and robot guidance.
Let us assess your application together
We test your sample in our laboratory and report on resolution, optics and lighting selection.